The Quiet Craft of Khmer Bronze Casting: A Morning in Tani Village

18 November 2026

We arrive in Tani village just after sunrise, when the air is still cool and the smoke from the first furnaces hangs low over the rice fields. Tani is a small community a short ride east of Siem Reap town, and it is one of the few places in the region where the old art of bronze casting is still practised by hand. You will not find a visitor centre here, just family workshops where the same tools have been passed down for generations.

Wax, Clay, and Fire

The first thing we notice is the smell: beeswax warming in a pot, mixed with the earthy scent of clay. A craftsman sits cross-legged on a low wooden platform, shaping a thin sheet of wax into the curve of a small bowl. He works without a pattern, measuring by eye and by touch. Once the wax model is finished, it is coated in layer after layer of clay slip, each one left to dry in the shade. The result is a solid clay shell with the wax trapped inside.

When the shell is fired, the wax melts away and runs out through a small hole, leaving a hollow mould. This is the lost-wax method, and it has been used in this region for centuries. The mould is then buried in sand and filled with molten bronze, which the team melts in a small furnace stoked with charcoal. We watch the metal turn from dull grey to a bright, liquid orange before it is poured. The heat pushes us back a step, and the air fills with a sharp, metallic smell.

The Workshop Rhythm

By mid-morning the workshop is in full swing. One person tends the furnace, another wraps finished pieces in cloth, and a third sits at a stone slab polishing a small bell until it rings with a clear, high note. We are struck by how quiet it is. There is no loud machinery, just the tick of cooling metal and the occasional scrape of a file. The craftsmen here make bells, bowls, small figures and decorative pieces, many of which end up in temples or homes around Siem Reap.

We ask about the designs, and a young caster shows us a row of wax models lined up on a shelf: a seated Buddha, a tiny elephant, a bell with a lotus pattern around its rim. Each one will be cast separately, and each one will come out slightly different. That is part of the charm. No two pieces are identical, and the small imperfections are proof that a human hand made them.

A Village of Makers

Tani is not a tourist attraction in the usual sense, and that is exactly why we like it. There are no ticket booths or guided tours. If you visit, you are a guest in a working village. We recommend going with a local guide or asking your hotel to arrange a visit, so that you can be introduced properly and know which workshops are open to visitors. The families here are welcoming, but they are busy, and a little courtesy goes a long way. Bring water, wear shoes you do not mind getting dusty, and plan to spend an hour or two simply watching.

Getting there

Tani village lies a few kilometres east of Siem Reap town, on the road toward the temples. The easiest way to get there is by tuk-tuk, which takes around twenty to thirty minutes from the centre, depending on traffic and the exact workshop you are visiting. Ask your driver to take you to Tani village and to wait, as there is no regular public transport. If you are cycling, the roads are flat and quiet, but leave early to avoid the heat. Check locally for the best time to visit, as workshop schedules vary.

Good to know

  • Go in the morning, when the furnaces are lit and the workshop is at its busiest.
  • Ask before taking photographs, especially inside the workshops.
  • Wear clothes you do not mind getting dusty, and bring water.
  • Arrange your visit through a local guide or your hotel so you are expected.Staying in Siem Reap? Bungalow 1955 is nine private apartments around a shared pool, minutes from Angkor — enquire about dates.

Cambodia’s 1,000-Year-Old Reclining Vishnu Statue Showcased in the United States

Back to stories